D-Link DWL-8500AP, Руководство администратора

Страница: 109 / 168

Configuring IEEE 802.1X Security on a Client 109
A Wireless Client Settings and RADIUS Server Setup
To use this type of security, you must perform the following steps:
1. Add the access point to the list of RADIUS server clients. (See “Configuring the RADIUS
Server for Authentication” on page 116.)
2. Configure the access point to use your RADIUS server (by providing the RADIUS server
IP address as part of the “IEEE 802.1X” security mode settings).
3. Configure wireless clients to use IEEE 802.1X security and “Smart Card or other
Certificate” as described in this section.
4. Obtain a certificate for this client as described in “Obtaining a TLS-EAP Certificate for a
Client” on page 119.
If you configured the access point to use IEEE 802.1X security mode with an external
RADIUS server, perform the following steps:
1. Configure IEEE 802.1X security with certificate authentication on each client as follows.
Choose WEP
Data Encryption mode
Choose Open
Choose Smart Card/Certificate
...then, click “Properties”
1 2
Enable (click to check) IEEE 8021x authentication
Enable auto
key option