manualshive.com logo in svg

D-Link DWL-3500AP, Руководство по настройке

Поделиться
Скачать
D-Link DWL-3500AP Скачать руководство пользователя страница 52

device and can cause the Wireless switch to lose communications with the “remote” AP 
causing the wireless demo network to go down.  This issue will resolve itself after the 
Wireless switch declares AP1 failed.  In a real-world environment most likely the AP will 
not fail, and a roam will occur because of client movement.  If an AP does fail and the 
routes are configured in the manner described above, a short interruption of service could 
be observed.  (Please see section 4.6.1 for a description of how to demonstrate a roam 
without the chance of a routing loop). 

 

4.2.3  Set the MTU Size 

Configure the interface MTU size appropriate throughout the network to support the 
larger frames potentially involved in L3 Tunneling. 
 

4.3  Configure WLAN Settings  

Configure the WLAN parameters to support the 3 Tunneled SSID Networks on both 
WS1 and WS2.  Configure the “Guest” SSID to use no security, “D-LINK-NET1” to use 
WPA2 (see below), and “D-LINK-NET2” to use Static-WEP.  Provide the L3 Tunnel 
Subnet addresses in the configuration. 

4.3.1 WPA2 

Configuration 

To support WPA2, enable “wpa-enterprise” security mode, configure the WPA Ciphers 
to use TKIP and CCMP, and include WPA version WPA2.  Furthermore, configure the 
IP address and configured secret for the Radius server in the AP Profile (192.168.4.1).  
You will also need to appropriately configure your client to support WPA2 which might 
require a client OS update. 

4.3.2 Configure 

Discovery 

Configure WLAN Discovery parameters on WS1 and WS2.  Use IP/L3 Discovery on 
WS1 and/or WS2 to discover the other peer switch across subnets (in other words, add 
the loopback address of WS2 into the IP discovery list for WS1).  Use L2/VLAN 
Discovery on WS1 and WS2 to discover the APs on VLANs 101 and 102 respectively (in 
other words, add VLAN 101 to the L2 discovery list on WS1 and VLAN 102 to the 
discovery list on WS2). 

4.3.3 Connections 

Connect devices and verify that APs move to managed state.  You will need to add the 
APs MAC addresses into your local AP database. 
 

4.4  Configure the RADIUS Server 

Since WPA Enterprise (WPA2) uses a RADIUS server to authenticate clients, you must 
configure a client entry for the AP, which makes requests to the RADIUS server on 

Содержание DWL-3500AP






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды