D-Link DWL-3500AP, Руководство по настройке

Страница: 18 / 61

1.8.5 Load Balancing
The Wireless Switch performs load balancing on a per radio basis by tracking the
wireless bandwidth utilization. The maximum bandwidth utilization is configured in the
Radio tab of the Basic Setup . If the utilization reaches the configured threshold then new
client associations are rejected. The default bandwidth utilization threshold is 60%. The
WLAN Utilization may be monitored in the Radio Details tab of Monitoring
Æ
Access
Points
Æ
Managed Access Points .
1.9 Switch and AP Cleanup
You will not need any of the settings you configured in this scenario for the other three
scenarios, so it is a good idea to reset the switch and the APs to the factory defaults.
To reset the switch configuration, click the
Tools menu and select Reset Configuration .
To reset the AP configuration, you will need to telnet into the AP CLI and use the
“factory-reset” command. As mentioned earlier, you can place the AP into “debug”
mode from the switch if the AP is currently managed to gain access to the UI.