background image

3.6.1 

Simulated Roam via Power Down of AP ................................................. 43 

3.6.2 

Simulated Roam via Disabling Radios ..................................................... 44 

3.6.3 

Real Roam................................................................................................. 44 

3.7 

Logs & Traps .................................................................................................... 45 

3.8 

Syslog Configuration ........................................................................................ 46 

3.9 

Debug................................................................................................................ 47 

Scenario 4 – L3 Edge: 2 Sw 2 APs .............................................................. 49 

4.1 

Overview........................................................................................................... 50 

4.2 

WS1 & WS2 LAN Configuration..................................................................... 51 

4.2.1 

DHCP........................................................................................................ 51 

4.2.2 

Configure routes on WS1, WS2, and L3 device....................................... 51 

4.2.3 

Set the MTU Size...................................................................................... 52 

4.3 

Configure WLAN Settings ............................................................................... 52 

4.3.1 

WPA2 Configuration ................................................................................ 52 

4.3.2 

Configure Discovery................................................................................. 52 

4.3.3 

Connections............................................................................................... 52 

4.4 

Configure the RADIUS Server ......................................................................... 52 

4.5 

Verifying the Configuration.............................................................................. 53 

4.6 

Testing the L3 Authenticated Roaming Feature ............................................... 53 

4.6.1 

Simulated Roam via Power Down of AP ................................................. 53 

4.6.2 

Simulated Roam via Disabling Radios ..................................................... 54 

4.6.3 

Real Roam................................................................................................. 54 

4.7 

WLAN Visualization ........................................................................................ 55 

Appendix

........................................................................................................................ 59 

 

Содержание DWL-3500AP






























































Отзывы: