D-Link DVG-5112S Скачать руководство пользователя страница 81

Страница: 81 / 98

DVG-5112S User’s Manual

MAINTENANCE

D-Link Systems, Inc.

Connect Provision Server Periodically:

Check the box to connect to Provisioning Server periodically.

Auto Provision Interval:

Enter the time for auto provisioning.

Random Offset:

Enter the offset of the time for auto provisioning.

Provision Retry Times:

Enter the retry time if a provisioning attempt fails.

Retry Interval:

Enter the interval for retrying.

Suspend Service:

Check the box to stop VoIP call service.

Note:

Contact your server provider if necessary.

MAINTENANCE

→

Provision

Binding Server for Trigger:

Check the box to trigger a connection between Provisioning Server and the

VoIP Telephone Adapter. Provisioning Server will bind a port for the VoIP Telephone Adapter to send
provision request.

Binding Port:

Enter the port number of Provisioning Server is used for binding.

Binding Interval:

Enter the interval at which the VoIP Telephone Adapter will keep the binding.

Содержание DVG-5112S



































































































Результаты поиска

Содержание DVG-5112S

Отзывы:

D-Link DVG-5112S, Руководство пользователя, Страница: 81 / 98

Результаты поиска

Содержание DVG-5112S

Отзывы: