D-Link VoiceCenter Quick Install Guide
Use the following steps to start the Microsoft
®
Response Point
™
Administrator software and log on to the DVX-2000MS Base Unit.
In Windows
®
XP, click
Start
>
All Programs
> and then click
Microsoft
Response Point Administrator
to start the program.
Select the DVX-2000MS base unit you just installed, and click
Connect
.
Note:
A few seconds may pass. If you don’t see the DVX-2000MS
base unit listed, it’s likely that the base unit or the computer on which
Administrator program is running, is not connected properly to the
LAN. Make sure all cables and power cords are connected. Another
potential problem is that the DVX-2000MS base unit is not turned
on.
Note:
If a Security Alert dialog box comes up, click
Unblock
.
Starting Microsoft Response Point
Configure the DVX-2000MS Base Unit
Содержание DVG-3104MS - VoiceCenter PSTN Gateway
Страница 1: ......