manualshive.com logo in svg

D-Link DVG-2101S, Руководство пользователя

Поделиться
Скачать
D-Link DVG-2101S Скачать руководство пользователя страница 58

 

DVG-2101S User Manual 

 

 

 

 

 

 

 

 

56 

 

FCC EMI Statement:

 

    This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular 
installation.  If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one of the 
following measures: 
-  Reorient or relocate the receiving antenna. 
-  Increase the separation between the equipment and receiver. 
-  Connect the equipment into an outlet on a circuit different from that to which  

the receiver is connected. 

-    Consult the dealer or an experienced radio/TV technician for help.

 

 

FCC Caution: 

    Any changes or modifications not expressly approved by the party responsible 
for compliance could void the user’s authority to operate this equipment.This 
device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, 
and (2) this device must accept any  interference received, including interference 
that may cause undesired operation. 
 

Содержание DVG-2101S



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды