D-Link DSR-1000 Скачать руководство пользователя страница 104

Страница: 104 / 378

D-Link DSR-Series User Manual

Section 5 - Connect to the Internet

Router Advertisement

Path: Network > IPv6 > IPv6 LAN Settings > Router Advertisement

To configure router advertisement settings:

1. Click

Network

IPv6

LAN Settings

Router Advertisement

tab.

2. Complete the fields in the table on the next page and click

Save

Field

Description

Status

Toggle to

to enable this feature.

Advertise Mode

Select

Unsolicited Multicast

to send router advertisements (RA’s) to all interfaces in the multicast group.

To restrict RA’s to well-known IPv6 addresses on the LAN, and thereby reduce overall network traffic,

select

Unicast only

Advertise Interval

When advertisements are unsolicited multicast packets, this interval sets the maximum time between

advertisements from the interface. The actual duration between advertisements is a random value

between one third of this field and this field. The default is 30 seconds.

Managed

Toggle to

to use the administered/stateful protocol for address auto-configuration. If set to

OFF

, the

host uses administered/stateful protocol for non-address auto configuration.

Other

Toggle to

to use administered/stateful protocol of other (i.e., non-address) information auto configuration.

Router Preference

This parameter (low/medium/high) determines the preference associated with the RADVD process of the

router. This is useful if there are other RADVD-enabled devices on the LAN as it helps avoid conflicts for

IPv6 clients.

MTU

The router advertisement will set this maximum transmission unit (MTU) value for all nodes in the LAN

that are auto-configured by the router. The default is 1500.

Router Lifetime

This value is present in RAs and indicates the usefulness of this router as a default router for the interface.

The default is 3600 seconds. Upon expiration of this value, a new RADVD exchange must take place

between the host and this router.

Save

Click

Save

at the bottom to save and activate your settings.

Router Advertisements are analogous to IPv4 DHCP assignments for LAN clients, in that the router will assign

an IP address and supporting network information to devices that are configured to accept such details. Router

Advertisement is required in an IPv6 network is required for stateless auto configuration of the IPv6 LAN.

By configuring the Router Advertisement Daemon on this router, the router will listen on the LAN for router

solicitations and respond to these LAN hosts with router advisements.

2. Right click on the record to get other options. Click

Edit

to open the Router Advertisement Configuration

page.

Содержание DSR-1000



























































































































































































































































































































































































Результаты поиска

Содержание DSR-1000

Отзывы:

Похожие инструкции для DSR-1000

Бренды по названию

Популярные бренды

D-Link DSR-1000, Руководство пользователя

Результаты поиска

Содержание DSR-1000

Отзывы:

Похожие инструкции для DSR-1000

Бренды по названию

Популярные бренды