D-Link DSR-1000 Скачать руководство пользователя страница 59

Страница: 59 / 378

D-Link DSR-Series User Manual

Section 5 - Connect to the Internet

Auto-Rollover using WAN IP

In this mode one of your WAN ports is assigned as the primary internet link for all internet traffic and the

secondary WAN port is used for redundancy in case the primary link goes down for any reason. Both WAN ports

(primary and secondary) must be configured to connect to the respective ISP’s before enabling this feature. The

secondary WAN port will remain unconnected until a failure is detected on the primary link (either port can be

assigned as the primary). In the event of a failure on the primary port, all internet traffic will be rolled over to

the backup port. When configured in Auto-Failover mode, the link status of the primary WAN port is checked at

regular intervals as defined by the failure detection settings.

Field

Description

WAN Mode

Select

Auto-Rollover Using WAN IP

from the drop-down menu.

Use Primary WAN Port

Select which WAN port is the primary.

Use Secondary WAN

Port

Select which port to use if the primary port fails.

WAN Health Check

• DNS lookup using WAN DNS Servers

: DNS Lookup of the DNS Servers of the primary link is used to

detect primary WAN connectivity.

• DNS lookup using DNS Servers

: DNS Lookup of the custom DNS Servers can be specified to check the

connectivity of the primary link.

• Ping these IP addresses

: These IP’s will be pinged at regular intervals to check the connectivity of the

primary link.

WAN1/WAN2/WAN3

Enter the DNS server or IP address to ping.

Note:

WAN3 is supported only in DSR-1000AC.

Retry Interval

Enter the time in seconds to initiate the WAN health check. Default is every 30 seconds.

Failover After

Enter the number of failures before the router will enable the failover process.

Note:

The DSR series routers support 3G USB Modem as a failover link when the Internet access is lost.

1. Click

Network

Internet

WAN Mode

2. Complete the fields from the table below and click

Save

Содержание DSR-1000



























































































































































































































































































































































































Результаты поиска

Содержание DSR-1000

Отзывы:

Похожие инструкции для DSR-1000

Бренды по названию

Популярные бренды

D-Link DSR-1000, Руководство пользователя

Результаты поиска

Содержание DSR-1000

Отзывы:

Похожие инструкции для DSR-1000

Бренды по названию

Популярные бренды