manualshive.com logo in svg

D-Link DSL-G624T, Руководство пользователя

Поделиться
Скачать
D-Link DSL-G624T Скачать руководство пользователя страница 5

DSL-G624T Wireless ADSL Router User Guide 

About This User Guide 

This user’s guide provides instructions on how to install the DSL-G624T Wireless ADSL Router and use it 
to provide Internet access for an Ethernet network or single computer. 

If you are using a computer with a functioning Ethernet port, the quickest and easiest way to set up the DSL-
G624T is to follow the instructions provided in the 

Quick Installation Guide

.  

Before You Start 

Please read and make sure you understand all the prerequisites for proper installation of your new Router. 
Have all the necessary information and equipment on hand before beginning the installation. 

Installation Overview 

The procedure to install the Router can be described in general terms in the following steps: 

Gather information and equipment needed to install the device. Before you begin the actual installation make 
sure you have all the necessary information and equipment. 

Install the hardware, connect the cables to the device, and connect the power adapter. 

Check the IP settings on your computer and change them if necessary so the computer can access the web-
based software built into the Router.   

Use the web-based management software to configure the device to suit the requirements of your ADSL 
service and requirements of your local network. 

Setup Wizard 

Many users will be able to configure all the settings necessary to use the DSL-G624T with the Setup Wizard. 
For ADSL connections that use PPPoE or PPPoA connections, the simplest way to set up the DSL-G624T is 
to use the Setup Wizard to configure the Internet connection. Once you access the web interface used to 
configure the device, just launch the Setup Wizard to configure your Internet connection.  

Packing List 

Open the shipping carton and carefully remove all items. Make sure that you have the items listed here. 

One DSL-G624T ADSL Ethernet Router 

One CD-ROM containing the User’s Guide and Quick Installation Guide  

One twisted-pair telephone cable used for ADSL connection  

• 

One straight-through Ethernet cable 

• 

One power adapter suitable for your electric service 

• 

One Quick Installation Guide

 

 

v

Содержание DSL-G624T























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды