DSL-G624T Wireless ADSL Router User Guide
Dynamic IP Address
A Dynamic IP Address connection configures the Router to automatically obtain its global IP address from a
DHCP server on the ISP’s network. The service provider assigns a global IP address from a pool of
addresses available to the service provider. Typically the IP address assigned has a long lease time, so it will
likely be the same address each time the Router requests an IP address.
To configure a Dynamic IP Address connection, perform the steps listed below. Some of the settings do not
need to be changed the first time the device is set up, but can be changed later if you choose. See the table
below for a description of all the settings available in this window.
WAN Settings menu – Dynamic IP Address
To configure a Dynamic IP Address connection for the WAN, follow these steps:
1. Choose
the
Dynamic IP Address
option from the
WAN Setting
pull-down menu.
2. Under
the
ATM VC Setting
at the top of the window should not be changed unless you have been
instructed to change them. However, if you are instructed to change the
VPI
or
VCI
values, type in
the values assigned for your account. Leave the
PVC
and
Virtual Circuit
setting at the default
(
Pcv0
and
Enabled
) values for now. This can be used later if you are configuring multiple virtual
30
