DSL-G624T Wireless ADSL Router User Guide
3
Basic Router Configuration
The first time you set up the Router it is recommended that you configure the WAN connection using a
single computer connected directly to the Router. Once the WAN connection is functioning properly, you
may continue to make changes to Router configuration including IP settings and DHCP setup. For
information on how to configure advanced features such as port redirection, filtering and firewall, please skip
ahead to the Advanced Router Management section on page 52.
Configuration Summary
Connect to the Router
To configure various settings used by the Router for Internet and access it is first
necessary to access the Router’s management HTML-based interface. This is done using an ordinary web
browser. Your computer must be able to “see” the Router before it can manage it using a browser. If the
Router is in the same “neighborhood” or subnet as the Router, you should be able to access the management
software. Therefore you must first make sure your computer has IP settings that place it in the same subnet
as the Router. The easiest way to make sure your computer has the correct IP settings is to configure it to use
the DHCP server in the Router. The DHCP server will automatically enable your computer to use a browser
to manage the Router. The next section describes how to change the IP configuration for a computer running
a Windows operating system to be a DHCP client. If you are running another operating system, make sure
your computer is configured as a DHCP client so it can automatically obtain IP settings from the Router.
Some operating systems will automatically select the best IP settings. Consult the user manual for the
operating system (OS) if you are unsure.
Configure the Internet (WAN) Connection
Most users will be able to complete this process using the
Setup Wizard
. The Setup Wizard can be launched once you have successfully connected with the Router’s
management software. There are different methods used to establish the WAN connection to the service
provider’s network and ultimately to the Internet. Your Router may already have most of the settings
configured by default. However you will probably at least have to type in a user name and password given to
you by your ISP. You may also need to know the encapsulation and connection type required to use for your
ADSL service. Your service provider should provide all the information needed to configure the WAN
connection.
Computer IP Settings
In order to configure your system to receive IP settings from the Router your computer must first have the
TCP/IP protocol installed. If you have an Ethernet port on your computer, it probably already has TCP/IP
protocol installed. If you are using Windows XP the TCP/IP is enabled by default for standard installations.
Instructions for configuring your computer to receive IP settings from the Router are provided in Appendix
B on page 101.
For computers running non-Windows operating systems, follow the instructions for your OS that configure
the system to receive an IP address from the Router, that is, configure the system to be a DHCP client.
Note
If you are not sure how to configure your Windows computer to be a DHCP client, see
Configuring IP Settings on Your Computer begiining on page 101.
9
