D-Link DPH-850S, Руководство пользователя

Страница: 96 / 123

95
Call waiting
Set whether to enable the call waiting function.
Voicemail Set the parameters of the voicemail:
Check for voicemail:
Check which line enabled
the voicemail , you can also enable it from here.
Number to dial for checking voicemail:
Set the
phone number to listen the voicemail for each line.
Number for sending calls to voicemail:
Set the
phone number of the voicemail for each line.
No answer time
Set no answer time. The default unit is second.
Digital map
Use E164 : Enable/Disable E164. After it is
enabled, it will directly dial numbers according
with E164 rules.
Use # as dial key
: Enable/Disable. After enabling
the function, input the number end with "#" in the
non-pre-dial mode, it will directly dial the phone
number.
Use fixed length
: Enable/Disable. After enabling
the function, inputting the number of specified
length in the non-pre-dial mode will make the call
directly.
Dial with fixed-length
: Enter the number of fixed
length(1-30)
Use time out
: Enable/Disable.
Dial timeout (3-99)
: After enabling the function,
input the number in the non-pre-dial mode, it will
dial the phone number in the specified time.
Dial plan prefix
: Enable/Disable. After enabled
the function, it will be automatically added the
outside line prefix number before the outgoing
number when you are going to call.
Outside line prefix
: Input the prefix number
Hotline number Hotline number
: Set the hotline number for each
SIP line.
Hotline timeout (0-99)
: Set the waiting time of the
hotline number after hooking off, if the number is
not set, the default time is 0, and then it will
immediately call the hotline number.
Reveal incoming
telephone place After enabling the call attribution show, and when
a call comes in, the incoming interface can display
the attribution information of the caller’s number.
Note:
1. Enable "DND", "Auto answer" and "call forward" at the same time, the
transfer effect priority is "DND" > > "Auto answer">> "call forward".