DIR-X1530
AX1500 Wi-Fi 6 Gigabit Router
User Manual
Configuring via Web-based Interface
Parameter
Description
SELECT ADDRESS
RANGE
Use the button to set one of the available IP address ranges. In the
window displayed, select the needed range and click the
SAVE
button to automatically fill in the
Start IP
and
End IP
fields.
Lease time
The lifetime of IPv6 addresses provided to clients.
The default route for
LAN clients
Move the switch to the right to let the clients, that received IPv6
addresses or configured them using the prefix, use the router as the
default IPv6 route.
DNS relay
Move the switch to the right so that the devices connected to the
router obtain the address of the router as the DNS server address.
Move the switch to the left so that the devices connected to the
router obtain the address transmitted by the ISP or specified on the
Advanced / DNS
page as the DNS server address.
When all needed settings are configured, click the
APPLY
button.
In the
Static IP Addresses
section, you can specify MAC address and IPv6 address pairs (set a
fixed IPv6 address in the local area network for a device with a certain MAC address). The router
assigns IPv6 addresses in accordance with the specified pairs only when the
Stateful
value is
selected from the
Mode of IPv6 address assignment
drop-down list in the
Dynamic IP
Addresses
section.
Figure 98. Configuring the local interface. The
IPv6
tab. The section for creating MAC-IPv6 pairs.
To create a MAC-IPv6 pair, click the
ADD
button (
). In the opened window, fill in the
MAC
address
field. You can choose a device connected to the router's LAN at the moment. To do this,
select the relevant MAC address from the drop-down list (the field will be filled in automatically).
Then in the
IP address
field, enter an IPv6 address which will be assigned to the device with the
specified MAC address. In the
Hostname
field, specify a network name of the device for easier
identification. To limit the time of the specified IPv6 address assignment, specify the required value
in the
Lease time
field. Click the
SAVE
button.
To edit the settings for an existing MAC-IPv6 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the
SAVE
button.
To remove a MAC-IPv6 pair, select the checkbox located to the left of the relevant line in the table
and click the
DELETE
button (
). Then click the
APPLY
button.
If needed, you can add your own address resource records. To do this, click the
ADD
button (
)
in the
Hosts
section (
available if in the
Dynamic IP Addresses
section the
Stateful
value is
selected from the
Mode of IPv6 address assignment
drop-down list
).
Page
116
of 254