DIR-X1530
AX1500 Wi-Fi 6 Gigabit Router
User Manual
Configuring via Web-based Interface
Figure 86. The page for creating a new
IPIP6
connection. The
IP
section.
Parameter
Description
IP
Obtain remote host
address automatically
Move the switch to the right to configure automatic assignment of a
remote host IPv6 address.
Type
Select an identification method for the remote host from the drop-
down list:
•
Address
: The remote host is identified by its IPv6 address.
•
FQDN
: The remote host is identified by its domain name.
The drop-down list is displayed if the
Obtain remote host
address automatically
switch is moved to the left.
Remote host
Enter the remote host IPv6 address if the
Address
value is selected
from the
Type
drop-down list.
Enter the remote host domain name if the
FQDN
value is selected
from the
Type
drop-down list.
The field is available for editing, if the
Obtain remote host
address automatically
switch is moved to the left.
Mode
An operation mode of the connection.
From the drop-down list, select the
DSLite
value.
Set MTU automatically
Move the switch to the right to set the maximum size of units
transmitted by the interface automatically.
Move the switch to the left to specify this parameter manually.
Upon that the
MTU
field is displayed.
MTU
The maximum size of units transmitted by the interface.
When all needed settings are configured, click the
APPLY
button.
After clicking the button, the window for additional configuration of the connection opens.
Page
101
of 254