DIR-X1530
AX1500 Wi-Fi 6 Gigabit Router
User Manual
Configuring via Web-based Interface
Click the
SAVE
button.
To edit fields in the
Tunneled Networks
section, select the relevant line in the table. In the
opened window, change the needed parameters and click the
SAVE
button.
To remove a subnet, select the checkbox located to the left of the relevant line in the table and click
the
DELETE
button (
). Also you can remove a subnet in the editing window.
After configuring all needed settings for the IPsec tunnel, click the
APPLY
button.
To edit the parameters of an existing tunnel, in the
Tunnels
section, select the relevant tunnel in the
table. On the opened page, change the needed parameters and click the
APPLY
button.
To disconnect an existing tunnel and establish it again, select the checkbox located to the left of the
relevant line in the table and click the
RECONNECT
button.
To remove an existing tunnel, select the checkbox located to the left of the relevant line in the table
and click the
DELETE
button (
). Also you can remove a tunnel on the editing page.
To disable VPN tunnels based on IPsec protocol, click the
DISABLE
button.
Page
129
of 254
