DIR-X1530
AX1500 Wi-Fi 6 Gigabit Router
User Manual
Configuring via Web-based Interface
You can specify the following parameters:
Parameter
Description
Enable
Move the switch to the right to enable the EoGRE tunnel.
Move the switch to the left to disable the EoGRE tunnel.
Name
A name of the tunnel for easier identification. You can specify any
name.
Remote IP address
The IP address of the remote local subnet.
Tagged traffic
Move the switch to the right to assign a tag (VLAN ID) to EoGRE
traffic and specify the needed value in the
VLAN ID
field displayed.
Interface
From the drop-down list, select a WAN connection through which
the tunnel will pass. Select the
Default gateway
value to use the
default WAN connection.
MTU
The maximum size of units transmitted by the interface.
After configuring all needed settings, click the
APPLY
button.
To edit the parameters of an existing tunnel, in the
Tunnels
section, select the relevant tunnel in the
table. On the opened page, change the needed parameters and click the
APPLY
button.
To remove an existing tunnel, select the checkbox located to the left of the relevant line in the table
and click the
DELETE
button (
).
VPN tunnels using EoGRE technology will appear in the
EoGRE interfaces
section on the
Advanced / VLAN
page and will be automatically removed from this section after the tunnel is
deleted from the current page.
Page
141
of 254