DIR-820
AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Configuring via Web-based Interface
You can specify the following parameters:
Parameter
Description
General Settings
Enable
Move the switch to the right to enable the server.
Move the switch to the left to disable the server.
Name
A name for the virtual server for easier identification. You can
specify any name.
Template
Select a virtual server template from the drop-down list, or select
Custom
to specify all parameters of the new virtual server
manually.
Interface
A WAN connection to which this virtual server will be assigned.
Protocol
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
NAT Loopback
Move the switch to the right in order to let the users of the router's
LAN access the local server using the external IP address of the
router or its DDNS name (if a DDNS service is configured). Users
from the external network access the router using the same address
(or DDNS name).
Public Network Settings
Remote IP
Enter the IP address of the server from the external network.
To add one more IP address, click the
ADD REMOTE IP
button
and enter the address in the displayed line.
To remove the IP address, click the
Delete
icon ( ) in the line of
the address.
Public port
A port of the router from which traffic is directed to the IP address
specified in the
Private IP
field in the
Private Network Settings
section. You can specify one port or several ports separated by a
comma.
Private Network Settings
Private IP
The IP address of the server from the local area network. To choose
a device connected to the router's LAN at the moment, select the
relevant value from the drop-down list (the field will be filled in
automatically).
Private port
A port of the IP address specified in the
Private IP
field to which
traffic is directed from the
Public port
. You can specify one port or
several ports separated by a comma.
Click the
APPLY
button.
Page
168
of 210
