DIR-820
AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Configuring via Web-based Interface
After creating the rules you need to configure the filtering modes.
To open the basic or additional wireless network for the devices which MAC addresses are
specified on this page and to close the wireless network for all other devices, in the section
corresponding to the band (
2.4 GHz
or
5 GHz
), left-click the line of the wireless network. In the
opened window, move the
Enable MAC filter
switch to the right. Upon that the
MAC filter
restrict mode
drop-down list will be displayed. Select the
Allow
value from the drop-down list
and click the
SAVE
button.
To close the wireless network for the devices which MAC addresses are specified on this page,
select the
Deny
value from the
MAC filter restrict mode
drop-down list and click the
SAVE
button.
To set a schedule for the MAC filter rule, click the
Set schedule
icon (
) in the line
corresponding to this rule. In the opened window, from the
Rule
drop-down list, select the
Create
rule
value to create a new schedule (
187) or select the
Select an
existing one
value to use the existing one. Existing schedules are displayed in the
Rule name
drop-down list.
To enable the MAC filter rule at the time specified in the schedule and disable it at the other time,
select the
Enable rule
value from the
Action
drop-down list and click the
SAVE
button.
To disable the MAC filter rule at the time specified in the schedule and enable it at the other time,
select the
Disable rule
value from the
Action
drop-down list and click the
SAVE
button.
To change or delete the schedule for a rule, click the
Edit schedule
icon (
) in the line
corresponding to this rule. In the opened window, change the parameters and click the
SAVE
button or click the
DELETE FROM SCHEDULE
button.
Page
132
of 210
