DIR-806A
Wireless AC750 Dual Band Router
User Manual
Figure 75. The page for creating a new
PPPoE IPv6
connection. The
Miscellaneous
section.
Parameter
Description
Miscellaneous
NAT
For the
PPPoE Dual Stack
type only.
If the switch is moved to the right, the network address translation
function is enabled. Do not disable the function unless your ISP
requires this.
Firewall
If the switch is moved to the right, protection against external
connections for the LAN devices is enabled (for example, against
attempts to get information about the LAN devices or to hack a
device from the LAN). For security reasons, it is recommended not
to disable this function.
RIP
Move the switch to the right to allow using RIP for this connection.
Ping
If the switch is moved to the right, the router responds to ping
requests from the external network through this connection. For
security reasons, it is recommended to disable this function.
Isolate connection
If the switch is moved to the right, the router uses an alternate
routing table for this connection. Enable this function only when
your ISP requires this.
When all needed settings are configured, click the
APPLY
button.
Page
88
of 180
