DIR-806A
Wireless AC750 Dual Band Router
User Manual
In order to disable the SNMP agent, move the
SNMP service status
switch to the left and click
the
APPLY
button.
If the SNMP manager operates over SNMPv2c, create a read-only community which will be used
by the SNMP manager to get data on the device. To do this, in the
Communities
section, click the
ADD
button.
Figure 98. The window for adding a community.
In the opened window, specify the community name in the
Name
field and click the
SAVE
button.
To change a community name, select the relevant line in the table. In the opened window, specify
the needed value of the
Name
field and click the
SAVE
button.
To remove a community, select the checkbox located to the left of the relevant line in the table and
click the
Delete
button.
If the SNMP manager operates over SNMPv3, create a read-only user which will be used by the
SNMP manager to get data on the device. To do this, in the
Users
section, click the
ADD
button.
Figure 99. The window for adding a user.
Page
122
of 180
