DIR-806A
Wireless AC750 Dual Band Router
User Manual
Figure 117. The page for adding an IPsec tunnel. The
General Settings
section.
You can specify the following parameters:
Parameter
Description
General Settings
Dynamic IPsec
Move the switch to the right to allow a remote host with any public IP
address to connect to the router via IPsec protocol. Such a setting can
be specified for one tunnel only. Connection requests via this tunnel
can be sent by a remote host only.
Remote host
A remote subnet VPN gateway IP address. The field is available, if the
Dynamic IPsec
switch is moved to the left.
Identifier
Select an identification method of a remote host from the drop-down
list:
Address:
A remote host is identified by its IP address.
FQDN:
A remote host is identified by its domain name.
Local identifier value
Specify the value of the identifier.
Pre-shared key
A key for mutual authentication of the parties.
Page
144
of 180