29
D-Link DIR-516 User Manual
Section 2 - Setting Up With a Web Browser - Router Mode
Enter the IP address assigned by your ISP.
Enter the subnet mask assigned by your ISP.
Enter the gateway assigned by your ISP.
Enter the DNS servers provided by your ISP.
Enter the Maximum Transmission Unit size. The default value
is 1500.
The default MAC address is set to the Internet port’s physical
interface MAC address on the broadband router. It is not
recommended that you change the default MAC address
unless required by your ISP. You can use the
Clone.Your.
PC’s.MAC.Address
button to replace the Internet port’s
MAC address with the MAC address of your Ethernet card.
IP Address:
Subnet Mask:
Default
Gateway:
Primary /
Seconday DNS
Server:
MTU:
MAC Address:
Static.IP
Select
Static.IP
if your IP information is provided to you by your
ISP. You will need to enter in the IP address, subnet mask, gateway
address, and DNS address(es) provided to you by your ISP. Each IP
address entered in the fields must be in the appropriate IP form,
which are four octets separated by a dot (x.x.x.x). The router will
not accept the IP address if it is not in this format.