36
DI-624S User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Advanced > Performance
Select
Short
or
Long Preamble.
The Preamble defines the length of the CRC
block (Cyclic Redundancy Check is a common technique for detecting data
transmission errors) for communication between the wireless router and the
roaming wireless network adapters.
Note: High network traffic areas should
use the shorter preamble type.
Beacons are packets sent by an Access Point to synchronize a wireless
network. Specify a value. 100 is the default setting and is recommended.
This value should remain at its default setting of 2432. If inconsistent data flow
is a problem, only a minor modification should be made.
The fragmentation threshold, which is specified in bytes, determines whether
packets will be fragmented. Packets exceeding the 2346 byte setting will be
fragmented before transmission. 2346 is the default setting.
(Delivery Traffic Indication Message)
3
is the default setting. A DTIM is a
countdown informing clients of the next window for listening to broadcast and
multicast messages.
Displayed in this window are the Wireless Performance features for the Access
Point portion of the DI-624S.
Choose
Enabled
to broadcast the SSID across the network. All devices on
a network must share the same SSID (Service Set Identifier) to establish
communication. Choose
Disabled
if you do not wish to broadcast the SSID
over the network.
Auto
is the default selection. Select from the drop down menu.
Select
GMode
if your wireless network consists of only 802.11g clients. If your
wireless network includes 802.11b clients, select
Mix Mode
.
Wireless Performance:
Beacon Interval:
RTS Threshold:
Fragmentation:
DTIM interval:
TX Rates:
Mode Setting:
Preamble Type:
SSID Broadcast:
Содержание DI-624S - AirPlus Xtreme G Wireless 108G USB Storage...
Страница 1: ......