86
DI-624S User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
How do I open ports on my router?
To allow traffic from the internet to enter your local network, you will need to open up ports or the
router will block the request.
Step 1
Open your web browser and
enter the IP Address of your D-Link
router (192.168.0.1). Enter username
(admin) and your password (blank by
default).
Step 2
Click on the
Advanced
on top
and then click
Virtual Server
on the
left side.
Step 3
Check
Enabled
to activate
entry.
Step 4
Enter a name for your virtual server entry.
Step 5
Next to
Private IP
, enter the IP Address of the computer on your local network that you
want to allow the incoming service to.
Step 6
Choose
Protocol Type
- either TCP, UDP, or both. If you are not sure, select both.
Step 7
Enter the port information next to
Private Port
and
Public Port
. The private and public
ports are usually the same. The public port is the port seen from the WAN side, and the private
port is the port being used by the application on the computer within your local network.
Step 8
Enter the
Schedule
information.
Step 9
Click
Apply
and then click
Continue
.
Note:
Make sure DMZ host is disabled. If DMZ is enabled, it will disable all Virtual Server entries.
Because our routers use NAT (Network Address Translation), you can only open a specific port to
one computer at a time. For example: If you have 2 web servers on your network, you cannot open
port 80 to both computers. You will need to configure 1 of the web servers to use port 81. Now you
can open port 80 to the first computer and then open port 81 to the other computer.
Содержание DI-624S - AirPlus Xtreme G Wireless 108G USB Storage...
Страница 1: ......
