D-Link DGS-3620-28PC-SI, Руководство по эксплуатации продукта

Страница: 52 / 502

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
42
Figure 3-19 Single IP Settings window
The fields that can be configured are described below:
Parameter Description
SIM State
Use the drop-down menu to either enable or disable the SIM state on the Switch.
Disabled
will render all SIM functions on the Switch inoperable.
Role State
Use the drop-down menu to change the SIM role of the Switch. The two choices are:
Candidate
– A Candidate Switch (CaS) is not the member of a SIM group but is connected
to a Commander Switch. This is the default setting for the SIM role of the Switch.
Commander
– Choosing this parameter will make the Switch a Commander Switch (CS).
The user may join other switches to this Switch, over Ethernet, to be part of its SIM group.
Choosing this option will also enable the Switch to be configured for SIM.
Group Name
Enter a Group Name in this textbox. This is optional. This name is used to segment
switches into different SIM groups.
Discovery
Interval (30-90)
The user may set the discovery protocol interval, in seconds that the Switch will send out
discovery packets. Returning information to a Commander Switch will include information
about other switches connected to it. (Ex. MS, CaS). The user may set the Discovery
Interval from
30
to
90
seconds. The default value is
30
seconds.
Hold Time Count
(100-255)
This parameter may be set for the time, in seconds; the Switch will hold information sent to
it from other switches, utilizing the Discovery Interval. The user may set the hold time from
100
to
255
seconds. The default value is
100
seconds.
Click the
Apply
button to accept the changes made.
After enabling the Switch to be a Commander Switch (CS), the
Single IP Management
folder will then contain four
added links to aid the user in configuring SIM through the web, including
Topology
,
Firmware Upgrade
,
Configuration Backup/Restore
and
Upload Log File
.
Topology
This window will be used to configure and manage the Switch within the SIM group and requires Java script to
function properly on your computer.
The Java Runtime Environment on your server should initiate and lead you to the Topology window, as seen below.