D-Link DGS-3620-28PC-SI страница 483 Скачать руководство пользователя

Страница: 483 / 502

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide

473

Username: Represent current login user.

Ipaddr: Represent client IP address.

macaddr : Represent client MAC address.

DNS Resolver

Event description: Duplicate Domain name cache added, leads a dynamic

domain name cache be deleted

Log Message: [DNS_RESOLVER(1):]Duplicate Domain name case name:

<domainname>, static IP: <ipaddr>, dynamic IP:<ipaddr>

Parameters description:

domainame: the domain name string.

ipaddr: IP address.

Informational

ARP

Event description: Gratuituios ARP detected duplicate IP.

Log Message: Conflict IP was detected with this device (IP: <ipaddr>, MAC:

<macaddr>, Port <[unitID:]portNum>, Interface: <ipif_name>).

Parameters description:

ipaddr: The IP address which is duplicated with our device.

macaddr: The MAC address of the device that has duplicated IP address as

our device.

unitID: 1.Interger value;2.Represent the id of the device in the stacking

system.

portNum: 1.Interger value;2.Represent the logic port number of the device.

ipif_name: The name of the interface of the switch which has the conflic IP

address.

Warning

Telnet

Event description: Successful login through Telnet.

Log Message: Successful login through Telnet (Username: <username>, IP:

<ipaddr>)

Parameters description:

ipaddr: The IP address of telnet client.

username: the user name that used to login telnet server.

Informational

Event description: Login failed through Telnet.

Log Message: Login failed through Telnet (Username: <username>, IP:

<ipaddr>)

Parameters description:

ipaddr: The IP address of telnet client.

username: the user name that used to login telnet server.

Warning

Event description: Logout through Telnet.

Log Message: Logout through Telnet (Username: <username>, IP: <ipaddr>)

Parameters description:

ipaddr: The IP address of telnet client.

username: the user name that used to login telnet server.

Informational

Event description: Telnet session timed out.

Log Message: Telnet session timed out (Username: <username>, IP:

<ipaddr>).

Parameters description:

ipaddr: The IP address of telnet client.

username: the user name that used to login telnet server.

Informational

Interface

Event description: Port link up.

Log Message: Port <[unitID:]portNum> link up, <link state>

Parameters description:

unitID: 1.Interger value;2.Represent the id of the device in the stacking

system.

portNum: 1.Interger value;2.Represent the logic port number of the device.

link state: for ex: , 100Mbps FULL duplex

Informational

Event description: Port link down.

Log Message: Port <[unitID:]portNum> link down

Parameters description:

unitID: 1.Interger value;2.Represent the id of the device in the stacking

system.

portNum: 1.Interger value;2.Represent the logic port number of the device.

Informational

802.1X

Event description: 802.1X Authentication failure.

Log Message: 802.1X Authentication failure [for <reason> ] from (Username:

<username>, Port: <[unitID:]portNum>, MAC: <macaddr> )

Parameters description:

reason: The reason for the failed authentication.

username: The user that is being authenticated.

unitID: The unit ID.

portNum: The switch port number.

macaddr: The MAC address of thr authenticated device.

Warning

Event description: 802.1X Authentication successful.

Log Message: 802.1X Authentication successful from (Username:

<username>, Port: <[unitID:]portNum>, MAC: <macaddr>)

Informational

Содержание DGS-3620-28PC-SI























































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-3620-28PC-SI

Отзывы:

Похожие инструкции для DGS-3620-28PC-SI

Бренды по названию

Популярные бренды

D-Link DGS-3620-28PC-SI, Руководство по эксплуатации продукта

Результаты поиска

Содержание DGS-3620-28PC-SI

Отзывы:

Похожие инструкции для DGS-3620-28PC-SI

Бренды по названию

Популярные бренды