D-Link DGS-3620-28PC-SI, Руководство по эксплуатации продукта

Страница: 289 / 502

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
279
Figure 7-10 Access Rule List window (IPv4 ACL)
Click the
<<Back
button to return to the previous page.
Click the
Add Rule
button to create a new ACL rule in this profile.
Click the
Show Details
button to view more information about the specific rule created.
Click the
Delete Rules
button to remove the specific entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
After clicking the
Add Rule
button, the following page will appear:
Figure 7-11 Add Access Rule (IPv4 ACL)
The fields that can be configured are described below:
Parameter Description
Access ID (1-256)
Type in a unique identifier number for this access. This value can be set from 1 to 256.
Auto Assign
– Tick the check box will instruct the Switch to automatically assign an
Access ID for the rule being created.
Action
Select Permit to specify that the packets that match the access profile are forwarded
by the Switch, according to any additional rule added (see below).
Select Deny to specify that the packets that match the access profile are not forwarded
by the Switch and will be filtered.
Select Mirror to specify that packets that match the access profile are mirrored to a port
defined in the config mirror port command. Port Mirroring must be enabled and a target
port must be set.
Priority (0-7)
Tick the corresponding check box if you want to re-write the 802.1p default priority of a