D-Link DGS-3100-48 Скачать руководство пользователя

Страница: 87 / 293

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Figure 0–6. Add/Edit VLAN Information Page

The

Add/Edit VLAN Information Page

contains the following fields:

Field

Description

VID

Defines the VLAN ID.

VLAN Name

Defines the user-defined VLAN name. The field ranges up to 32 characters.

Unit

Defines the stacking member for which the VLAN parameters are displayed.

Untag Port

Defines the interface is an untagged VLAN member. Packets forwarded by the interface are
untagged.

Tag Port

Defines the interface is a tagged member of a VLAN. All packets forwarded by the
interface are tagged. The packets contain VLAN information.

Forbidden Port

Defines the interface VLAN membership, even if GVRP indicates the port is to be added.

Not Member

Indicates that the interface is not a member of the VLAN.

Port Select All

Selects all ports and either untags, tags, excludes, or removes the VLAN membership.

Define the

VID

VLAN

Name

, and

port-related

fields.

Select the

Tagged

Untagged

, and

Forbidden

ports.

Click

. The VLAN is saved, and the device is updated.

To modify a VLAN:

Click

L2 Features > 802.1Q VLAN

. The

VLAN Configuration Page

opens:

Select a VLAN in the VLAN Table.

Click

. The configured VLAN parameters are displayed in the

Add/Edit VLAN Information

section.

Modify the VLAN parameters.

Click

. The VLAN information is modified, and the device is updated.

Содержание DGS-3100-48






































































































































































































































































































Результаты поиска

Содержание DGS-3100-48

Отзывы:

Похожие инструкции для DGS-3100-48

Бренды по названию

Популярные бренды

D-Link DGS-3100-48, Руководство пользователя

Результаты поиска

Содержание DGS-3100-48

Отзывы:

Похожие инструкции для DGS-3100-48

Бренды по названию

Популярные бренды