D-Link DGS-3100-48 Скачать руководство пользователя страница 242

Страница: 242 / 293

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

226

ID SEVERITY

CATEGORY

MESSAGE DESCRIPTION

%(5)s%(4)y ACCEPTED

destination addresses is
accepted.

SYSLG8.31.43

Information
al AAA

%(1)s connection for user
%(2)s, source %(5)s%(3)y
destination %(5)s%(4)y
TERMINATED

A connection for the
specified user between the
specified source and
destination addresses is
terminated.

SYSLG8.31.46

Information
al

AAA

AAA FILE overflow.
Compression is
perfomred. Within a
compression not valid
records are deleted.

The AAA file is full.
Compression is performed
during which invalid
records are deleted.

SYSLG8.31.5

Information
al

AAA

Method being retried

Authentication with the
current method failed, and
authentication is repeated
once more by using the
same method.

SYSLG8.31.6

Information
al

Method

succeeded

Authentication with the
current method succeeded –
an access is granted.

SYSLG8.31.63

Information
al

AAA

User CLI session for user
%(2)s over %(1)s , source
%(3)y destination %(5)s
%(4)y TERMINATED.
The Telnet/SSH session
may still be connected.

The CLI session for the
specified user between the
specified source and
destination addresses is
terminated. The Telnet/SSH
session may still be
connected.

SYSLG8.31.64

Information
al AAA

User CLI session for user
%(2)s over %(1)s , source
%(3)y destination %(5)s
%(4)y ACCEPTED

The CLI session for the
specified user between the
specified source and
destination addresses is
accepted.

SYSLG8.31.7

Information
al

AAA

Method failed

SYSLG8.31.8

Information
al

AAA

Method error

SYSLG8.45.18

Information
al

Up/Download

Files Copy - source URL
%(1)s destination URL
%(2)s

The files are copied from
the specified source address
to the specified destination
address.

SYSLG8.48.31

Information
al STP

Attention: port %(1)j from
which the bpdu was
received is configured as
Fast Port

A received BPDU message
indicates that the specified
port is configured as the
Fast port..

SYSLG8.49.11

Information
al

sshpClientId: illegal
connection id %(1)d

SYSLG8.49.14

Information
al

Security

Closed SSH connection to
%(1)y

SYSLG8.49.2

Information
al

SSH

SSH log: %(1)s

The string parameter
describes the reason this
message was called.

Содержание DGS-3100-48






































































































































































































































































































Результаты поиска

Содержание DGS-3100-48

Отзывы:

Бренды по названию

Популярные бренды

D-Link DGS-3100-48, Руководство пользователя

Результаты поиска

Содержание DGS-3100-48

Отзывы:

Бренды по названию

Популярные бренды