D-Link DGS-3100-48 страница 238 Скачать руководство пользователя

Страница: 238 / 293

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

222

ID SEVERITY

CATEGORY

MESSAGE DESCRIPTION

SYSLG8.97.18 Error

System

Memory for notifying
applicaton %(1)s could
not be allocated.

Memory for notifying the
specified application could
not be allocated.

SYSLG1.0.55

Information
al

Up/Download

File %(1)s has been Auto
Updated

The specified file has been
Auto Updated.

SYSLG1.0.56

Information
al Up/Download

Auto Update Completed;
rebooting the switch

Auto Update is completed.
The switch is being;
rebooted.

SYSLG1.0.59

Information
al Up/Download

Active image successfully
changed to image %(1)d

Active image is
successfully changed to the
specified image.

SYSLG1.2.4

Information
al

entity configuration
change trap.

SYSLG1.3.0

Information
al

Interface

Pse Port %(1)s delivering
power to the PD.@

The specified PSE port is
delivering power to the PD.

SYSLG1.3.1

Information
al System

PSE power usage %(1)d
in unit %(2)d is above the
threshold.@

The PSE power used by the
specified unit is above the
threshold.

SYSLG1.3.2

Information
al

System

PSE power usage %(1)d
in unit %(2)d is below the
threshold.@

The PSE power used by the
specified unit is below the
threshold.

SYSLG1.5.23

Information
al

Interface

Unit %(1)d was shutdown
- JUMBO frames not
supported.

The specified unit is
shutdown because Jumbo
frames are not supported.

SYSLG1.5.24

Information
al

Stack

Master switchover: unit
%(1)d is now master.

The specified unit is now
the Master unit.

SYSLG1.5.25

Information
al

Stack

Backup master unit %(1)d
was removed from the
stack.

The specified backup
master is removed from the
stack.

SYSLG1.5.26

Information
al

Stack

Unit %(1)d was removed
from the stack.

The specified unit is
removed from the stack.

SYSLG1.5.28

Information
al

Ipc connection with unit
%(1)d failed.

The IPC connection with
the specified unit has failed.

SYSLG1.5.29

Information
al

Configuration changed:
%(1)s

SYSLG1.5.30

Information
al

Stack

Stack cable %(1)s : link
%(2)s on unit-%(3)d

The specified stacking cable
is connected to the specified
unit.

SYSLG1.6.11

Information
al

PS# %(1)d status changed
- %(2)s.

The system uses two power
supply sources: #1 and #2.
The system can operate
with one or both power
supply units. The power
supply has changed.

SYSLG1.6.8

Information
al

System

FAN# %(1)d status
changed - %(2)s.

The specified fan status has
changed.

SYSLG4.10.13

Information
al

Add dynamic MAC
%(1)m - Vlan %(2)d
failed, %(3)d mac failed to
be inserted from the last

Содержание DGS-3100-48






































































































































































































































































































Результаты поиска

Содержание DGS-3100-48

Отзывы:

Похожие инструкции для DGS-3100-48

Бренды по названию

Популярные бренды

D-Link DGS-3100-48, Руководство пользователя

Результаты поиска

Содержание DGS-3100-48

Отзывы:

Похожие инструкции для DGS-3100-48

Бренды по названию

Популярные бренды