D-Link DGS-3100-48 Скачать руководство пользователя

Страница: 57 / 293

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Polling for Time Information

SNTP is used to poll time information from SNTP server. Using SNTP enables accurate system clock.

The

Time Settings Page

allows network managers to enable and configure the SNTP time settings on the device. To enable

SNTP:

Click

Configuration > SNTP Settings > Time Settings.

The

Time Settings Page

opens:

Figure 0-10. Time Settings Page

The Time Settings Page contains the following fields:
Status

Field

Description

Time Source

Defines the time source by which the system time is set. The possible field values are:

SNTP —

Indicates that the system time is retrieved from a SNTP server.

System Clock —

Indicates that the system time is set locally by the device.

Current Time

Displays the current date and time.

SNTP Settings Section

Field

Description

SNTP First Server

Defines the IP address of primary SNTP server from which the system time is
retrieved.

SNTP Second Server

Defines the IP address of secondary SNTP server from which the system time is
retrieved.

SNTP Poll Interval in Seconds

Defines the interval (in seconds) at which the SNTP server is polled for Unicast
information. The range is 60-86400 seconds

The Poll Interval default is 1024 seconds.

Set Current Time

Field

Description

Time Setting

Defines the current system date. The field format is Day/Month/Year.

Time in HH MM SS

Defines the current system time. The field format is HH:MM:SS based on the 24-hour
clock (Military Time) For example, 9:00PM is configured as 21:00:00.

Содержание DGS-3100-48






































































































































































































































































































Результаты поиска

Содержание DGS-3100-48

Отзывы:

Похожие инструкции для DGS-3100-48

Бренды по названию

Популярные бренды

D-Link DGS-3100-48, Руководство пользователя

Результаты поиска

Содержание DGS-3100-48

Отзывы:

Похожие инструкции для DGS-3100-48

Бренды по названию

Популярные бренды