32
System > Trap Setting
A Trap Setting allows the Web-Smart Switch to monitor Trap
information through the Web-based Utility of an IP address on the
LAN. By default, Trap Setting is
Disabled
. When the Trap Setting is
Enabled
, enter the
Destination IP
address of the managing PC that
will receive trap information.
Figure 24 – System > Trap Setting
System Event:
Monitors the system’s trapping information.
Device Bootup:
Traps system boot-up information.
Illegal Login:
Traps events of incorrect password logins,
recording the IP of the originating PC.
Fiber Port Events:
Monitors the fiber port status.
Link Up/Link Down:
Traps fiber connection information.
Twisted pair Port Events:
Monitors the copper cable port status.
