25
Figure 13 – DHCP Refresh
Web-based Utility
The DGS-1224T Web-Smart Switch has a web browser GUI interface
for configuring the Switch through a web browser. To see the list of
web browsers the Web-based Utility supports, see
Supported web
browsers
on page 20. A network administrator can manage, control
and monitor the Switch from a PC on the local LAN. This section
describes how to operate the functions found in the Web-based Utility.
Login
Before beginning to configure the Web-Smart Switch through a web
browser over an Ethernet connection, the PC used to manage the
Switch must reside on the same the IP network. By default, the Switch
automatically obtains an IP address from a DHCP Server. The admin
configuring the Switch must check the LAN’s DHCP Server to
identify the IP Address assigned to the Switch. The default IP address
is 192.168.0.1 if the Switch cannot successfully obtain an IP address
from a DHCP Server. If the DHCP assigned IP address of the Web-
Smart Switch is 192.168.0.1, then the managing PC should use
192.168.0.x (where x is a number between 2 and 254) as its IP address,
