4 Configuration
DGS-1210 series Metro Ethernet Managed Switch User Manual
52
Configuration > 802.1v Protocol VLAN > 802.1v Protocol Group Settings
The 802.1v Protocol Group Settings page allows user to configure the untagged ports of different protocols
on the same physical port.
Figure 4.68 - Configuration > 802.1v Protocol VLAN > 802.1v Protocol Group Settings
Group ID (1-16):
Select an ID number for the group. The value is between 1 and 16.
Group Name:
Specifies the group name for the 802.1v protocol group.
Click the
Add
button to add a new entry based on the information entered.
Click the
Delete
All
button to remove all the entries based on the information entered.
Protocol:
Specifies the packets to protocol-defined VLANs by examining the type octet within the packet
header to discover the type of protocol associated with it. The types are Ethernet II, IEEE802.3 SNAP, and
IEEE802.3 LLC.
Protocol Value:
Enter a value for the group. The protocol value is used to identify a protocol of the frame
type specified. The form of the input is 0x0 to 0xffff.
Configuration > 802.1v Protocol VLAN > 802.1v Protocol VLAN Settings
The 802.1v Protocol VLAN Settings page allows user to configure the Protocol VLAN settings.
Figure 4.69 - Configuration > 802.1v Protocol VLAN > 802.1v Protocol VLAN Settings
Group ID:
Select a previously configured Group ID from the drop-down menu.
VID (1-4094):
Specifies the VID to be created.
Group Name:
Select a previously configured Group Name from the drop-down menu.
VLAN Name:
Specifies the VLAN name to be created.
Port List:
Enter the specified ports to be configured or tick the
All Ports
check box.
Click the
Add
button to add a new entry based on the information entered.
Search Port List: Specifies the port to be searched.
Click the
Find
button to view the information with specified ports.
To display all previously configured port lists on the button half of the screen click the
Show All
button.
Содержание DGS-1210 Series
Страница 159: ...140 ...