3 Getting Started
DGS-1210 series Metro Ethernet Managed Switch User Manual
16
3
Getting Started
This chapter introduces the management interface of D-Link DGS-1210/ME Metro Ethernet Switch.
Management Options
Using Web-based Management
Connecting to the Console Port
Management Options
The D-Link DGS-1210/ME Metro Ethernet Switch can be managed through any port on the device by using
the web-based management interface, or the D-Link Network Assistant (DNA).
Each switch must be assigned its own IP address, which is used for communication with the web-based
management interface or a SNMP network manager. The PC should have an IP address in the same range
as the Switch. Each Switch allows up to four users to access the web-based management interface
concurrently.
However, if you want to manage multiple D-Link Smart Managed Switches, the D-Link Network Assistant
(DNA) is a more convenient choice. By using the D-Link Network Assistant (DNA), you do not need to
change the IP address of your PC, making it easier to simultaneously initialize multiple D-Link Managed
Switches.
Please refer to the following installation instructions for the Web interface and the D-Link Network Assistant
(DNA).
Using Web-based Management Interface
After successfully installing the Switch, you can configure the Switch, monitor the network status, and display
statistics using a web browser.
Supported Web Browsers
The embedded Web-based Management currently supports the following web browsers:
Microsoft Internet Explorer 10/11
Microsoft Edge 25
Chrome 51
Safari 5.1.7
Connecting to the Switch
The access the web interface you will need the following equipment:
1.
A PC with a RJ45 Ethernet port.
2.
A standard Ethernet cable
Connect on end of the Ethernet cable to any of the ports on the front panel of the Switch and connect the
other end of Ethernet cable to the Ethernet port on the PC.
Содержание DGS-1210 Series
Страница 159: ...140 ...