D-Link DGS-1210 Series Скачать руководство пользователя страница 142

Страница: 142 / 159

4 Configuration

DGS-1210 series Metro Ethernet Managed Switch User Manual

ACL rule to limit traffic. The step of bandwidth is 64kbps. Due to limited metering rules, not all ACL rules can
associate with a metering rule.

Figure 4.210 - ACL > ACL Flow Meter

Profile ID:

The pre-configured Profile ID for which to configure the Flow Metering parameter.

Access ID (1-128):

The pre-configured Access ID for which to configure the Flow Metering parameters.

Enter the appropriate information and click

Find

the entries will be displayed on the lower half of the table.

To edit and entry click the corresponding

Modify

button, to delete an entry click the corresponding

Delete

button, to add a new entry click the

Add

button which will display the following window for the user to

configure.

Figure 4.211 - ACL > Add ACL Flow Meter

Profile ID (1-6):

Specify the profile ID.

Access ID (1-128):

Specify the Access ID that will be used to configure the Flow Metering parameters, enter

a value between 1 and 128.

Mode:

To be used the corresponding information.

Rate: Specify the committed information Rate of the packet. The range is from 64 to 1024000
kbyte.

Содержание DGS-1210 Series































































































































































Результаты поиска

Содержание DGS-1210 Series

Отзывы:

Похожие инструкции для DGS-1210 Series

Бренды по названию

Популярные бренды

D-Link DGS-1210 Series, Руководство пользователя

Результаты поиска

Содержание DGS-1210 Series

Отзывы:

Похожие инструкции для DGS-1210 Series

Бренды по названию

Популярные бренды