D-Link DES-3528 - xStack Switch - Stackable Скачать руководство пользователя страница 258

Страница: 258 / 322

xStack

DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

257

To open this window, click

ACL > ACL Flow Meter

Figure 7 - 50 ACL Flow Meter window

The following fields may be configured:

Parameter Description

Profile ID / Profile

Name

The pre-configured Profile ID/Name for which to configure the Flow Metering parameters.

Access ID

The pre-configured Access ID for which to configure the Flow Metering parameters.

Enter the appropriate information and click

Find

the entries will be displayed on the lower half of the table. To edit an

entry click the corresponding

Modify

button, to delete an entry click the corresponding

Delete

button, to add a new

entry click the

Add

button which will display the following window for the user to configure.

Figure 7 - 51 ACL Flow Meter - Add window

The following fields may be configured:

Parameter Description

Profile ID

Use the drop down menu to select the pre-configured Profile ID that will be used to configure the
Flow Metering parameters.

Profile Name

Use the drop down menu to select the pre-configured Profile Name.

Access ID (1-128)

Enter the Access ID that will be used to configure the Flow Metering parameters, enter a value
between

and

128

Mode

Select the mode to be used either

trTCM

srTCM

and enter the corresponding information.

trTCM

−

Two Rate Three Color Marker, marks packets green, yellow or red based on two rates

and two burst sizes. It is useful when peak rates need to be enforced.

•

CIR (64Kbps)

–

Specifies the Committed Information Rate of the packet. Tha range is

from

15624

. The unit is 64Kbps. That is to say, 1 means 64Kbps.

Содержание DES-3528 - xStack Switch - Stackable



































































































































































































































































































































Результаты поиска

Содержание DES-3528 - xStack Switch - Stackable

Отзывы:

D-Link DES-3528 - xStack Switch - Stackable, Руководство пользователя, Страница: 258 / 322

Результаты поиска

Содержание DES-3528 - xStack Switch - Stackable

Отзывы: