D-Link DES-3528 - xStack Switch - Stackable Скачать руководство пользователя страница 137

Страница: 137 / 322

xStack

DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

136

CFM Loopback Settings

This window is used to configure the CFM Loopback settings on the Switch.

To view this window, click

L2 Features

> CFM > CFM Loopback Settings

as shown below:

Figure 3 - 87 CFM Loopback Settings window

The following parameters can be configured:

Parameter Description

MEP Name (Max:32

characters)

The name of the Maintenance End Point.

MEP ID (1-8191)

The ID for the Maintenance End Point between

and

8191

MD (Max:22

characters)

The Maintenance Domain Name.

MA (Max:22

characters)

The Maintenance Association Name.

MAC Address

The destination MAC address.

LBMs Number (1-

65535)

The number of LBMs to be sent the default value is

LBM Payload

Length (0-1500)

The payload length of the LBM to be sent, the default value is

LBM Payload

Pattern (Max:1500

characters)

The arbitary amount of data to be included in a Data TLV, along with the indication of whether
the Data TLV is to be included.

LBMs Priority

The 802.1p priority to be set in the transmitted LBMs. If not specified it uses the same priority
as CCMs and LTMs sent by the MEP.

Click

Apply

to implement changes made.

Содержание DES-3528 - xStack Switch - Stackable



































































































































































































































































































































Результаты поиска

Содержание DES-3528 - xStack Switch - Stackable

Отзывы:

D-Link DES-3528 - xStack Switch - Stackable, Руководство пользователя, Страница: 137 / 322

Результаты поиска

Содержание DES-3528 - xStack Switch - Stackable

Отзывы: