D-Link DES-3528 - xStack Switch - Stackable, Руководство пользователя, Страница: 119 / 322

xStack
®
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
118
STP Bridge Global Settings
To open the following window, click
L2 features > Spanning Tree > STP Bridge Global Settings
Figure 3 - 62 STP Bridge Global Settings window
The following parameters can be set:
Parameter Description
STP Status
Use the radio buttons to enable or disable the STP Status.
STP Version
Use the pull-down menu to choose the desired version of STP to be implemented on the
Switch. There are three choices:
STPCompatability - Select this parameter to set the Spanning Tree Protocol (STP)
globally on the switch.
RSTP - Select this parameter to set the Rapid Spanning Tree Protocol (RSTP) globally
on the Switch.
MSTP
−
Select this parameter to set the Multiple Spanning Tree Protocol (MSTP)
globally on the Switch.
Forwarding BPDU
This field can be Enabled or Disabled. When Enabled, it allows the forwarding of STP
BPDU packets from other network devices. The default is Disabled.
Bridge Max Age
(6 - 40)
The Max Age may be set to ensure that old information does not endlessly circulate
through redundant paths in the network, preventing the effective propagation of the new
information. Set by the Root Bridge, this value will aid in determining that the Switch has
spanning tree configuration values consistent with other devices on the bridged LAN. If
the value ages out and a BPDU has still not been received from the Root Bridge, the
Switch will start sending its own BPDU to all other switches for permission to become
the Root Bridge. If it turns out that your switch has the lowest Bridge Identifier, it will
become the Root Bridge. The user may choose a time between
6 and 40 seconds. The
default value is 20 .
Bridge Hello Time
(1 - 2)
The Hello Time can be set from 1 to 2 seconds. This is the interval between two
transmissions of BPDU packets sent by the Root Bridge to tell all other switches that it is
indeed the Root Bridge. The default value is
2 .
Bridge Forward Delay
(4 - 30)
The Forward Delay can be from 4 to 30 seconds. Any port on the Switch spends this
time in the listening state while moving from the blocking state to the forwarding state.
TX Hold Count (1-10)
Used to set the maximum number of Hello packets transmitted per interval. The count
can be specified from
1 to 10 . The default is 6.