D-Link DES-3528 - xStack Switch - Stackable, Руководство пользователя, Страница: 151 / 322

xStack
®
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
150
Parameter Description
Pool Name
Denotes the name of the DHCP pool for which you are currently adjusting the parameters.
IP Address
Enter the IP address to be assigned to requesting DHCP Clients. The IP address is a network
address working with its netmask. (ex. If this entry is given the IP address 10.10.10.2 and the
netmask is 255.255.255.0, the assigned addresses to DHCP Clients will resemble 10.10.10.x,
where x is a number between 1 and 255.)
Netmask
Enter the corresponding Netmask of the IP address assigned above.
NetBIOS No de
Type
This field will allow users to set the type of node server for the previously configured Net BIOS
Name server. Using the pull-down menu, the user has four node type choices:
Broadcast , Peer to
Peer , Mixed , and Hybrid .
Domain Name
Enter the domain name for the DHCP client. This domain name represents a general group of
networks that collectively make up the domain. The Domain Name may be an alphanumeric string
of up to 64 characters.
Boot File
This field is used to specify the Boot File that will be used as the boot image of the DHCP client.
This image is usually the operating system that the client uses to load its IP parameters.
Next Server
This field is used to identify the IP address of the device that has the previously stated boot file.
DNS Server
Address
Enter the IP address of a DNS server that is available to the DHCP client. The DNS Server
correlates IP addresses to host names when queried. Users may add up to three DNS Server
addresses.
NetBIOS Name
Server
Enter the IP address of a Net BIOS Name Server that will be available to a Microsoft DHCP Client.
This Net BIOS Name Server is actually a WINS (Windows Internet Naming Service) Server that
allows Microsoft DHCP clients to correlate host names to IP addresses within a general grouping of
networks. The user may establish up to three Net BIOS Name Servers.
Default Router
Enter the IP address of the default router for a DHCP Client. Users must configure at least one
address here, yet up to three IP addresses can be configured for this field. The IP address of the
default router must be on the same subnet as the DHCP client.
Pool Lease
Using this field, the user can specify the lease time for the DHCP client. This time represents the
amount of time that the allotted address is valid on the local network. Users may set the time by
entering the days into the open field and then use the pull-down menus to precisely set the time by
hours and minutes. Users may also use the Infinite check box to set the allotted IP address to
never be timed out of its lease. The default setting is 1 day.
Click
Apply
to implement changes made.