D-Link DES-3252P - Web Smart Switch, Инструкция по установке

Страница: 32 / 301

Initial Configuration
Page 32
Configuring an Initial Console Password
To configure an initial console password, enter the following commands:
When initially logging on to a device through a console session, enter george at the password prompt.
When changing a device’s mode to enable, enter george at the password prompt.
Configuring an Initial Telnet Password
To configure an initial Telnet password, enter the following commands:
When initially logging onto a device through a Telnet session, enter bob at the password prompt.
When changing a device mode to enable, enter bob .
Configuring an Initial SSH password
To configure an initial SSH password, enter the following commands:
When initially logging onto a device through a SSH session, enter ”jones” at the password prompt.
When changing a device mode to enable, enter “jones”.
Configuring an Initial HTTP Password
To configure an initial HTTP password, enter the following commands:
Console(config)#
aaa authentication login default line
Console(config)#
aaa authentication enable default line
Console(config)#
line console
Console(config-line)#
login authentication default
Console(config-line)# enable authentication default
Console(config-line)#
password
george
Console(config)#
aaa authentication login default line
Console(config)# aaa authentication enable default line
Console(config)#
line telnet
Console(config-line)#
login authentication default
Console(config-line)#
enable authentication default
Console(config-line)#
password
bob
Console(config)#
aaa authentication login default line
Console(config)#
aaa authentication enable default line
Console(config)#
line ssh
Console(config-line)#
login authentication default
Console(config-line)#
enable authentication default
Console(config-line)#
password
jones
Console(config)#
ip http authentication local
Console(config)#
username admin password
user1
level
15