D-Link DES-3252P - Web Smart Switch, Инструкция по установке

Страница: 220 / 301

Configuring SNMP
Configuring SNMP Security
Page 220
Defining SNMP Communities
Access rights are managed by defining communities in the SNMP Communities Page . When the community
names are changed, access rights are also changed. SNMP communities are defined only for SNMP v1 and
SNMP v2c. To define SNMP communities:
1. Click System > SNMP > Security > Communities . The SNMP Communities Page opens:
Figure 150:SNMP Communities Page
The SNMP Communities Page is divided into the following tables:
•
Basic Table
•
Advanced Table
SNMP Communities Basic Table
The SNMP Communities Basic Table SNMP Communities Basic Table contains the following fields:
•
Management Station — Displays the management station IP address for which the basic SNMP community
is defined.
•
Community String — Defines the password used to authenticate the management station to the device. The
field is either user defined or All (0.0.0.0) . If all is selected, the community string is defined for all management
stations.
•
Access Mode — Defines the access rights of the community. The possible field values are:
–
Read Only — Management access is restricted to read-only, and changes cannot be made to the
community.
–
Read Write — Management access is read-write and changes can be made to the device configuration,
but not to the community.
–
SNMP Admin — User has access to all device configuration options, as well as permissions to modify
the community.
•
View Name — Contains a list of user-defined SNMP views.