4 Configuration
DES-1210 Series Switch Web UI Reference Guide
Cable Length (meter):
If the test result shows OK, then cable length will be indicated for the total length of
the cable. The cable lengths are categorized into four types: <50 meters, 50~80 meters, 80~100 meters and
>100 meters.
NOTE:
Cable length detection is effective on
Gigabit ports only.
NOTE:
If the port state of DES-1210-08P just
changed from link up to link down, please wait 5
seconds to execute the cable diagnostic test or
the test result might be incorrect.
Monitoring > System Log
The System Log page provides information about system logs, including information when the device was
booted, how the ports are operating, when users logged in, when sessions timed out, as well as other
system information.
Figure 4.130 – Monitoring > System Log
ID:
Displays an incremented counter of the System Log entry. The Maximum entries are 500.
Time:
Displays the time in days, hours, and minutes the log was entered.
Log Description:
Displays a description event recorded.
Severity:
Displays a severity level of the event recorded.
Click
Refresh
to renew the page, and click
Clear
to clean out all log entries.
84
