4 Configuration
DES-1210 Series Switch Web UI Reference Guide
Security > Smart Binding > Black List
The Black List displays the unauthorized clients that have been blocked by the restrictions of Manual Binding
Settings or Auto Scan Settings.
Figure 4.91 – Security > Smart Binding > Black List
By giving conditions, desired devices information can be screened out below then click
Find
to search for a
list of the entry:
VID:
Enter the VLAN ID number of the device.
IP Address:
Enter the IP Address of the device.
MAC Address:
Enter the MAC Address of the device.
Port:
Enter the port number which the device connects.
Check a box of
Delete
column to release an entry from the forbidden list then click
Apply
to delete an entry
from the list.
Click
Select All
to
select all entries, or click
Clean
to select none of the entries.
AAA > RADIUS Server
The RUAIUS Server of the Switch allows you to facilitate centralized user administration as well as providing
protection against a sniffing, active hacker.
Figure 4.92 – AAA > RADIUS Server
Index:
Choose the desired RADIUS server to configure: 1, 2 or 3.
IP Address:
Select IPv4 or IPv6 and enter the IP address.
Authentication Port (1 - 65535):
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Accounting Port (1 - 65535):
Set the RADIUS account server(s) UDP port. The default port is 1813.
Timeout (1 – 255 sec):
This field will set the time the Switch will wait for a response of authentication from
the user. The user may set a time between
1
and
255
seconds. The default setting is
5
seconds.
Retransmit (1 – 255 times):
This command will configure the maximum number of times the Switch will
accept authentication attempts. Users failing to be authenticated after the set amount of attempts will be
denied access to the Switch and will be locked out of further authentication attempts. Command line
interface users will have to wait 60 seconds before another authentication attempt. Telnet and web users will
6
6
3
3