D-Link DCS-6915 Скачать руководство пользователя страница 36

Страница: 36 / 69

D-Link DCS-6915 User Manual

Section 3: Advanced Configuration

Network

LAN

Get IP address automatically (DHCP)

: The camera’s default setting is . Please refer to User’s

Manual for login with the default IP address. If select , after the IP Camera restarts, users can

search it through the installer program: DeviceSearch.exe, which can be found in “DeviceSearch”

folder in the supplied CD. NOTE: Please make the record of the IP Camera’s MAC address, which

can be found in the label of the camera, for identification in the future.

Note: The camera will switch to static IP after 60 seconds if an IP address is not assigned

Use fixed IP address

: To setup a static IP address, select and move the cursor to the IP address

field and insert the new IP address, ex. 192.168.7.123; then go to the Default gateway (explained

later) and change the setting, eg. 192.168.7.254.

IP address

: This is necessary for network identification.

Subnet mask

: It is used to determine if the destination is in the same subnet. The default

value is “255.255.255.0".

Default gateway

: This is the gateway used to forward frames to destinations from a different

subnet. An invalid gateway setting will fail to transmit to destinations in a different subnet.

Primary DNS

: The Primary DNS is the primary domain name server that translates hostnames

into IP addresses.

Secondary DNS

: The Secondary DNS is a secondary domain name server that backups the

primary DNS.

IP Settings

Содержание DCS-6915






































































Результаты поиска

Содержание DCS-6915

Отзывы:

Похожие инструкции для DCS-6915

Бренды по названию

Популярные бренды

D-Link DCS-6915, Руководство пользователя

Результаты поиска

Содержание DCS-6915

Отзывы:

Похожие инструкции для DCS-6915

Бренды по названию

Популярные бренды