D-Link DCS-6915 Скачать руководство пользователя страница 23

Страница: 23 / 69

D-Link DCS-6915 User Manual

Section 3: Advanced Configuration

Snapshot

Click this button to capture and save still images. The captured images will be displayed in a pop-up window. Right-click the image and choose

Save Picture As to save it in JPEG (*.jpg) or BMP (*.bmp) format.

Recording

Click this button to record video clips to your computer. When you exit the web browser, video recording stops accordingly.

Recording Folder

Specify a storage destination for the recorded video files.

Microphone Level

Microphone Level: When the mute function is not active, move the slider bar to adjust the level of the microphone (internal/external) that is

connected to your network camera.

Microphone Mute

Microphone Mute/Un-mute: Click to turn off the microphone (internal/external) that is connected to your network camera. Press again to turn

the microphone back on.

Speaker Volumn

Speaker Volume - When the mute function is not active, move the slider bar to adjust the volume of the speakers that are connected to your

network camera.

Speaker Mute

Speaker Mute/Un-mute: Click to mute the external speaker that is connected to the network camera. Press again to un-mute the speaker.

Full Screen

Click this button to switch to full screen mode. Press the “Esc” key to switch back to normal mode.

Zoom ratio

Auto:

The video zoom ratio will be changed automatically according to viewing window size.

100%:

Keep the video zoom ratio at 100%

50%:

Keep the video zoom ratio at 50%

25%:

Keep the video zoom ratio at 25%

Camera Control

Содержание DCS-6915






































































Результаты поиска

Содержание DCS-6915

Отзывы:

Похожие инструкции для DCS-6915

Бренды по названию

Популярные бренды

D-Link DCS-6915, Руководство пользователя

Результаты поиска

Содержание DCS-6915

Отзывы:

Похожие инструкции для DCS-6915

Бренды по названию

Популярные бренды