62
D-Link DCS-6314 User Manual
Section 3: Configuration
Here you can configure the ICR (Removable IR-Cut Filter) and IR (Infrared Light Control) settings. When the ICR filter is switched on, it blocks infrared
light and allows only visible light to pass through. The ICR is disengaged in low-light environments.
Automatic:
Day Mode:
Night Mode:
Schedule
Mode:
IR Light
Control:
Off:
On:
Sync:
Schedule:
If you select this option, the Day/Night mode is
set automatically. Generally, the camera uses Day
mode and switches to Night mode when it gets
dark.
Day mode enables the IR-Cut Filter.
Night mode disables the IR-Cut Filter.
Set up the Day/Night mode using a schedule. The
camera will enter Day mode at the starting time
and return to Night mode at the ending time.
The camera can enable or disable the IR (infrared)
light according to your preferences. This setting
provides additional controls depending on your
specific application.
The IR light will always be off.
The IR light will always be on.
The IR light will turn on when the ICR sensor is on.
The
IR Light Control
will turn on and off based on
the schedule that you select using the drop-down
menus below.
Click on
Save Settings
.
ICR and IR
