40
D-Link DCS-6314 User Manual
Section 3: Configuration
Network Setup
Use this section to configure the network connections for your camera. All relevant information must be entered accurately.
LAN Settings:
DHCP:
Static IP Client:
IP Address:
Subnet Mask:
Default Router:
Primary DNS:
Secondary
DNS:
Enable UPnP
Presentation:
Enable
UPnP Port
Forwarding:
This section lets you configure settings for your
local area network.
Select this connection if you have a DHCP server
running on your network and would like your
camera to obtain an IP address automatically.
You may obtain a static or fixed IP address and
other network information from your network
administrator for your camera.
Enter the fixed
IP address
in this field.
This number is used to determine if the destination is
in the same subnet. The default value is 255.255.255.0.
The router (gateway) used to forward frames to
destinations in a different subnet. Invalid gateway
settings may cause the failure of transmissions to a
different subnet.
The primary domain name server (DNS) translates
names to IP addresses.
The secondary DNS acts as a backup to the primary.
Enabling this setting allows your camera to be
configured as a UPnP device on your network.
Enabling this setting allows the camera to add port
forwarding entries into the router automatically on
a UPnP capable network.
