50
D-Link DCS-6314 User Manual
Section 3: Configuration
Motion Detection
Enable Video Motion
to allow your camera to implement the
Motion Detection
feature. You may specify a specific area that will be
used for monitoring.
Enable Video
Motion:
Sensitivity:
Percentage:
Draw Motion
Area:
Erase Motion
Area:
Check this box to enable the motion detection
feature of your camera.
Specifies the measurable difference between two
sequential images that indicates motion. Enter a
value between zero and 100.
Specifies the amount of motion in the window
being monitored that is required to initiate an
alert. When set to 100%, any motion detected
within the entire window triggers a snapshot.
Draw the motion detection area by dragging
your mouse in the window (indicated by the red
square).
To erase a motion detection area, simply click on
the red square that you wish to remove.
Right clicking on the camera image brings up the
following menu options:
•
Select All:
Draws a motion detection area over
the entire screen.
• Clear All:
Clears any motion detection areas
that have been drawn.
• Restore:
Restores the previously specified
motion detection areas.
Click
Save Settings
.
